Sealing a garage floor...

The floor of your garage is exposed to intense corrosion and deterioration due to road salt, oils and other auto fluids.
Sealing your garage floor reduces dust and makes cleaning and sweeping easier. A clear acrylic concrete sealer protects the concrete from damage and stains. Also the same sealers can be used on concrete walks and driveways or as a primer under acrylic or polyurethane floor paints. You should take care when and where you apply a sealer because they cannot be applied over paint or other coatings.

In order to do the sealing yourself you need several materials and tools: protective clothing, neoprene rubber gloves, goggles, a stiff brush and a bucket, a paintbrush, a cartridge-style respirator with organic-vapor and small-particle filters, paint roller with extension handle and tray, medium nap roller cover, a concrete degreaser and of course some concrete sealer. Usually ½ gallon of sealer is used for approximately 100 square feet.

Before sealing you have to clean the floor because it has to be free of dirt, grease and oil. To do this you should use a
stiff scrub brush to apply the cleaner and concrete degreaser according to the instructions. Allow the solution to lay on the floor for 15 to 20 minutes more for stubborn stains after scrubbing. After his you should rinse thoroughly with clear water. You may need several applications.  Many concrete sealers contain hazardous chemicals that may be harmful to skin and eyes and the vapors are not safe to breathe but the vast majority are acrylic. The best way to avoid damages to your skin, eyes and lungs is to wear the protective equipment made of neoprene rubber gloves, goggles and a respirator with both organic-vapor and solid-particle filter cartridges. During the process of sealing the floor you should continuously ventilate the garage by opening all doors and windows and also using a fan would be a great idea.

After cleaning and drying the concrete, the sealer has to be applied. The sealer should be tested in an inconspicuous
area before applying. Some uneven density in the concrete may result in light/dark appearance that may be objectionable. By using the medium-nap paint roller with extension handle is the easiest way to apply the sealer. Start
in a rear corner continuing to work your way out of the garage. Before doing anything else you should allow the
sealer to dry as indicated on the sealer bottle, usually for a few hours. For a driveway the procedure is essentially the
same but it would be quicker to use a garden sprayer to apply the sealer to a large driveway. You should act with
caution not to over spray on other material due to the high risk of staining.

Possibly related posts: (automatically generated)

• Related posts on garage floor
• FernGully: The Last Rainforest » Blog Archive » Dark Floors
• Floor Covering Business Cards
• Floor Covering Options

Rescuing concrete floors from holes and adhesives...

As companies attempt to retrofit floor spaces and walls, carpeting and vinyl tile are often removed or repositioned. These renovations usually end up exposing large areas of adhesives, underlayments, and
sprawling holes from anchors, studding, and equipment. Now there is a solution with step by step instructions and help.

Remodelers often can see no alternative but to reinstall similar adhesives and floor coverings like carpet and tile. This is unfortunate because hard epoxy, urethane, and glass emulsion surfaces offer less expensive and longer wearing alternatives.

If concrete is exposed to wear, it will eventually deteriorate. Friction wear, erosion, and contamination all play a role. Dust, cracks, crumbling, rough surfaces, and the inability to keep the environment clean are symptoms of a floor that has not been  protected and is moving towards an unserviceable condition. Carpeting often holds contaminants in place and can be a growth medium for mold and mildew. Vinyl tile cannot hold up under heavy wheeled traffic, is subject to lifting when wet, and has a soft finish which can be contaminated by solvents and dyes. In contrast, laminated epoxy coatings create a wear-barrier between a floor and its environment. These laminated surfaces not only keep the concrete from deteriorating but also provide a protective plate over it. Contaminants and hazards, like PCBs, heavy metals, and toxic chemicals, are kept away from the porous concrete. Properly applied, these laminated surfaces can provide decades of protection and service.

Epoxy coated floors can cure, rather than just cover over, the holes that exist in even the most devastated floors. Customers are often surprised how holes from old walls and equipment stands can be made
to disappear when filled with 100% solid epoxy and then ground flush. The process is quick, easy, and long lasting.

Supplies that may be needed include adhesive removers, oil removing detergents, and durable long lasting epoxy fillers for holes, joints, cracks, and crumbling surfaces. Kits of materials can be customized to owner specification and delivered directly to the job site. Kits include full directions and 24/7 help lines staffed by seasoned flooring experts, so professionals and amateurs alike can successfully install a quality floor.